Eaves flashing roof drainage & gutter guard 1.0 m

The high-quality eaves flashing made of color-coated aluminum provides a professional finish for your roof edge and ensures reliable roof drainage. It reliably channels rainwater from the roof surface into the gutter and effectively protects the underlying structure from moisture damage and rot. The fixed angle C is 135°, which is ideal for a roof pitch of 45°.
Dimensions A = 10 cm and dimension B = 5 cm

Important note on appearance: Please note that colored sheet metal profiles are always color-coated on one side only. The back of the sheets is colorless.

Installation: The eaves flashings are mounted flat directly on the eaves and nailed with roofing felt nails. The vertical leg B should extend cleanly into the gutter. The required size of the flashings depends on the dimensions, total length, and position of your gutter (larger eaves flashing will be needed for larger or longer gutters). The individual flashings are laid with an overlap of 8–10 cm at the joints.

Please note regarding material surfaces: The industrial polyester paint coating guarantees a consistent, stain-free surface that is permanently weather-resistant. Due to strong UV radiation, a slight, completely natural fading of the color may occur over the years.

Dimensional tolerances: Due to manufacturing tolerances in the raw material and during bending, the profiles may show minimal deviations. These are within the following narrow limits:

Length tolerance over 1.0 m: +/- 5 mm

Deviations in leg lengths: +/- 2 mm

Deviations in bending angles: +/- 3°